2021 Seawind 119012m

PREMIUM EXPERIENCE WITH ENHANCED DESIGN FEATURES
The Seawind 1190 variant of the range appeals to the hundreds of Seawind owners who enjoy racing and fast cruising.

Using racing technologu with Dynex synthetic riging, weight has been taken out of the rig up height.

• Aluminium Hatches & portholes (9 in total)
• 4 x Forward Hatches 470mm x 470mm
• 2 x Mid cabin hatches 470mm x 470mm
• 1 x Port Bathroom window hatch 507mm x 377mm
• 1 x Aft Cabin window hatch 507mm x 377mm

• Fibreglass Deck Hatches:
• Forward anchor & storage hatches x 5
• Cockpit storage hatches x 2

• 6 x Docking cleats. Each side : bow, stern & amidships.
• 1 x Heavy duty mooring cleat on forward walkway.
• Ventilation: 2 x forward cabin hatch vents.
• Mast base turning blocks. All halyards & sail controls to cockpit.
• 13 x Rope clutches.
• Sheet winches : 2 x 45ST – 2 speed self tailing, 3 x 40ST – 2 speed self tailing & 1 x 15ST self tailing
• Stanchions/Rails: High quality stanchions 3 life-lines with 700mm high synthetic lifelines to meet CE requirements.
• 2 x transom access gates with pelican hook releases.
• Aft swim ladder
• Dinghy davits.

• Furniture and cabin sides in gloss gelcoat finish.
• Cabin top lined with lightweight liner.
• Floors: synthetic timber flooring.
• Cabinet doors in lightweight modern finish.

SALOON:

• New Lightweight carbon fibre saloon table.
• Upholstered settee.
• Cocktail cabinet with carbon fibre finish.
• Forward opening windows with in marine ocean hatch frame. Side windows in 6mm toughened glass.
• Tri-fold saloon doors.
• Removable alloy framed, helm hatches.

SLEEPING CABINS:

• Light weight pvc foam cored timber doors on all private cabins.
• Port & Starboard fwd cabins : Each queen sized bed (2050mm x 1540mm).
• Aft Starboard cabin : Double bed (1990mm x 1230mm).
• Mattresses 150mm ( 6” ) foam upholstered.
• Cabins lined.
• 12volt LED lighting.
• Storage/Cupboards.

PORT HEAD:

• New Polished light weight pvc foam cored timber door.
• Manual toilet. Discharge via holding tank.
• Holding tank built in. Discharge Pump out by shore station or directly overboard 130L.
• Pipes, skin fittings and sea-cocks are easily accessible and to meet survey requirements.
• Vanity basin with pressure water.
• Separate shower stall with wall mounted shower head & mixer tap.
• Electric shower bilge pump with direct overboard discharge.
• Large quantity cupboards / shelves to very high quality.

• Spacious galley with New lightweight Granite coat benchtops.
• Three (3) burner LPG stove, stainless steel pot holders. Flame failure device to shut off LPG immediately in event of flame going out.
• Stainless steel sink.
• Pressure fresh water system.
• Refrigerator: Front opening upright fridge with freezing compartment 130 litres.
• Under bench storage.
• Trash bin.
• LPG solenoid control in galley.

• Twin lightweight Honda 20hp engines. Mounted under each helm seat at each steering station.
• Remote electric key start with electric tilt fitted.
• Dual engine controls at port helm station.

• High quality DC electrical switch panel with circuit breakers, LED indicator lights and voltage display.
• Marine grade tinned electrical wiring with extensive use of heat sealed connectors.
• Batteries x 3 comprising: House System (260 amp hrs) : 2 x 130 amp hr heavy duty batteries. One engine cranking battery – 130 amp hr heavy duty battery.
• 230amp heavy duty isolation switch.
• 12 V lighting : Numerous 12V interior lamps and courtesy lights throughout including recessed lights in cockpit.
• 4 x 12V Outlets.
• CE approved navigation lights. Port & Starboard mounted on bows.
• Deck floodlight mounted on spreaders.
• Mast head anchor / riding light.

• Clear anodised aluminium mast and boom. Double spreader rig.
• Standing Rigging  – Forestay 1 x 19 Dieform wire.
• Cap Shruds Dynex Dux, synthetic rigging.
• Diamonds 1 x 19 Stainless Steel wire.

• Halyards – Main halyard:  12 mm Spectra rope : Heavy duty shackle.
• Jib halyard:  8 mm Spectra rope. Heavy duty shackle.
• Topping lift:  8 mm rope, Heavy duty shackle.
• Spinnaker Halyard:  8mm Spectra with snap-shackle
• Screecher halyard with new 2:1 purchase system.
• Boom outhaul: 10mm Spectra.

• Slab reefing.
• Fully battened square top black aramid, laminate mainsail. Triple stitched radial construction. Leach adjustable batten end caps. Fibreglass sail battens.
• Black aramid, laminate jib with vertical battens.
• Asymmetric spinnaker in any color of your choice.
• Carbon fibre bowsprit with synthetic bridle wires.
• Mainsail cover with integrated lazy jack system.
• Self-tacking headsail, curved headsail traveller track with end stops. With New single line control sheet to cockpit.
• Main sheet run to port and starboard helms.