2015 Jeanneau Sun Odyssey 509

CONSTRUCTION

• HULL CONSTRUCTION: Monolithic GRP hull hand-laid into 2-part opening mould. ISO gelcoats. Barrier coat used to guard against osmosis ; 3rd generation counter-moulded structure glued and laminated to hull for strength. High-load zones cut-out for access to the hull
• DECK MATERIAL: Injected deck via Prisma Process. This process yields a very high-end part that is finished on both sides and reduces the weight by 30% with minimum impact on the environment
• KEEL TYPE: Shoal Keel
• WHERE BUILT: Jeanneau , France

ENGINES AND CONTROLS

• ENGINE : 75HP Yanmar diesel engine with sail drive
• GEARBOX: Yanmar SD60 saildrive
• CONTROLS:   Engine panel and throttle located near starboard helm
• COOLING SYSTEM:  Heat exchanger

SAILS AND RIGGING

• SPAR MAKER/MATERIAL: Classic anodized aluminum mast and boom with customized, reinforced fittings and double spreaders 3 x reefing lines
• STANDING RIGGING MATERIAL: Standing rigging is discontinuous wire 1 x 19
• RUNNING RIGGING MATERIAL: Running rigging boom topping lift, main halyard, jib halyard, main sheet, jib sheets in polyester
• BOOM VANG: Rigid boom vang

WINCHES 

• GENOA WINCHES: 2 Self-tailing electric genoa sheet winches
• MAIN HALYARD WINCH: 2 Self-tailing halyard sheet winches

ACCOMMODATIONS

• SALOON/INTERIOR :Headroom in saloon: 6’4” / 6’6” (1.95m / 1.98m)
• GALLEY: Galley Headroom: 1,94 m / 6’4’’ Long
• FORWARD CABINS :Headroom: 6'1" / 1.86m
• AFT CABINS :Max headroom: 6’5” / 1.97m

INSIDE EQUIPMENT

• FANS: Fans in saloon and all cabins
• USB SOCKETS:1 x USB plug per cabin
• SALOON TABLE:Large table with two removable, aluminium legs and central bottle storage; Saloon table converts to double berth
• CONTROLS AT NAV STATION:
• FRESH WATER PUMP: Fresh water system with high-pressure 12v pump (19L/min) in-line filter and accumulator tank 2 x Roto moulded water tanks 385L / 101USgal tank under the forward berth & 230L / 60USgal tank under aft cabin berth
• SINK: Double sinks (stainless steel) with covers and chrome mixer tap
• INTERIOR CONSTRUCTION/WOOD TYPE:  Alpi Fine Teak interior with marine ply core, solid trim, anti-uv varnish

ELECTRICAL EQUIPMENT

• HOUSE BATTERIES: 5x100Amp
• ENGINE BATTERIES: (1) 100Amp
• ALTERNATOR: Engine alternator 125amp

DECK EQUIPMENT

• DODGER: Yes
• OUTBOARD ENGINE: Not supplied
• DINGHY: Not supplied
• WARPS: 6 x Mooring / dock lines
• FENDERS: x6
• 12V OUTLETS:12v circuit for house and engine systems, 12v plugs at nav station, 110/220v plugs in each cabin, saloon, chart table and galley
• WINDLASS: 1500w Electric windlass - 12mm chain gypsey with handheld remote wired direct and chain counter
• PRIMARY ANCHOR: Primary (stainless steel)
• SECONDARY ANCHOR: secondary (galvinized)
• SAFETY EQUIPMENT: Yes
• OTHER EQUIPMENT:Bed linens, cookware, snorkeling equipment

The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.